Stainless Steel Shower Head with Trp Nozzles with Faceplate ABS Chrome Plating

Key Specifications/Special Features
Stainless steel shower head with TRP nozzles          
Diameter: φ86mm
Height:70mm            
Brass ball joint
Saturating spray
Chrome plated body and ABS faceplate
Product Details
Primary Competitive Advantages:
Country of Origin
Packaging
Price
Product Features
Product Performance
Prompt Delivery
Quality Approvals
Reputation
Main Export Markets:
Asia
Australasia
Central/South America
Eastern Europe
Mid East/Africa
North America
Western Europe


 


 













With a simple press or sensor, the built-in MCU will start the motor to turn the PE sleeve turning a new loop, so to provide a fresh and clean seat for every user, visible hygiene, no cross infection at all.

Advantages:
   A, Promote the cleanliness and neatness of toilets.
   B, Reduce cost on toilet paper, detergents and cleaners payrolls
   C, Easy installation within 3 minutes, widely adapt to 90% toilets.
   D, Used PE roll split, recyclable materials, Eco-friendly

1 Materials:

    1.1 ABS soft close cover
    1.2 PP comfortable seat ring
    1.3 Durable Nylon & Stainless steel hinge
    1.4 HDPE sleeve - 0.012mm thickness film
    1.5 Stainless steel manual button

2. Battery and Adapter
    2.1 Lead acid rechargeable battery Voltage
           Rated voltage: 6V
           Standard recharging time :  6 hours

    2.2 UL listed Adapter
          Rated Output: 7.5V
         (Both battery and adapter can run the motor)
         (Adapter can recharging the battery and running the motor at the same time)
          (Suggest using the adapter priority)

3. Technique
     3.1 Static power consumption≤0.5w
     3.2 Dynamic power consumption≤5w

4. Characteristics:
    4.1 Patented 3 layers waterproof design
    4.2 Twinkling red means low voltage
    4.3 Over-load safety design
    4.4 6 seconds delay design to avoid abuse usage
    4.5 Adapted to 90% toilets --   (2 holes gap 13-21cm)
    4.6 Easy installation within 3 minutes

5. Package detail:
    Product weight: 3.5KG
    Product size: 50*45*15cm
        1pc /  box / 49*18*54.8cm
        5pcs / carton / 92.5*56.5*50cm
        N.W./G.W.:21/25kg

Some similar items listed below:



6. Installation steps:

6.1 Get the 2 holes of the toilet ready for installation.
6.2  Widen range of 13-21cm bracket adjustable to suit the most toilets,
then tight the 2 sets of screws to firm the base on the toilet.
6.3 Horizontally forwarding the cover set till it clicked well on the base by leaning on the surface of toilet.
6.4 Get a PE roll, release the end of PE sleeve about 10-15cm and have it split about 5cm, insert the head of split PE sleeve under the "usage counter"
6.5 Putting through the PE sleeve along the seat ring.......
6.6 The split head of PE sleeve can easily go through the blade, and then fasten the head of sleeve to the plastic axle rack and make several circles, after that, please click the rack on the stand, switch on the motor after power on to check the performance of PE sleeve turning. So the installation finished.


7. Application:
    For public toilets such as : Airports, Banks, Churches, Department stores &Shopping malls, Exhibition halls, Hotels, Restaurants, Coffee shops, Clubs, Beauty shops, Hospitals, Schools, Offices, etc.